Air Gas Processor  

GAS
37.4 mol in a gallon of gas
37.4 mol/gal X 5300 KJ/mol = 198220 kJ/gal
198220 kJ/gal / 30 mi/gal = 6607.3 kj/mi

HHO
210.3 mols in a gallon of water
210.3 mol/gal X 286 kj/mol = 60145.8 kj/gal
60145.8 kj/gal / 30 mi/gal = 2004.86 kj/mil

THE ULTRA SECRET HAPPY MIX
210.3 mols in a gallon of water
210.3 mol/gal X 6505.2 kj/mol = 1368043.56 kj/gal
1368043.56 kj/gal / 30 mi/gal = 45601.452 kj/mil

============================================

this shows how Stanley Meyer technology really works in the real world. And to think this is not creating hydrogen and oxygen but forcing the ionized oxygen atoms to break the bonds of the water molecule apon a spark or heat ignition source.

============================================

This is what I get for gasoline:
(5080kJ/mol)(1gram/44.6kJ)(1L/800grams)(gal/3.785L)(30miles/gal)= 1.13 miles/mol.
It is only .0376gal. Also note I changed the energy content of gasoline to its real value 5300 kJ/mol was kinda on the high side. That 5080 kJ/mol is for 91 octane gasoline or in our case in the US supper unleaded. 

Now for hho:
(286 kJ/mol)(1g/15.89 kJ)(1L/1000g)(1gal/3.785L)= 0.00476gal/mol but we need 17.76 moles of hho to equal the energy content of gasoline so then 17.76(.00476gal/mol)= .0845 gallons of water that will need to be converted to travel the same distance.

Now with the GP/EEC plus atomized water:
(6505.2 kJ/mol)(1g/361.4 kJ)(1/1000)(1/3.785)= 0.00476gal/mol but now only .781 moles of the mixture is need to equal the energy content of gasoline so then .781(.00476gal/mol)= 0.00371 gallons of water needs to be atomized to go the same distance.

This is the power of the GP/EEC and note this is the worste case assuming no hydrogen is produced by the injectors. If you produce hydrogen then add in 1836 kJ/mol minus the energy used to create the gas. Also the numbers should be less for the energy to strip the oxygen atoms was not factored in nor was the energy to run the injectors, but it does give a good ballpark figure we can work with.

================================================

Now I was curious as to how this all holds up to Meyer's aproximently 22 gallons of water used to go from La, Ca., to Ny, NY (2,778 miles)and this is what I came up with:
It takes aproximently 92.6 gallons of gasoline to go the distance.
hho aproximently 208.2 gallons of water will have to be electrolized.
The Meyer mixture takes 9.2 gallons of water that will need to be atomized. 
So this means the missing numbers have an effect on the amount of water needed to be atomized to go the same distance for it should be around 22 gallons used or so. Again this is what the science I stumbled apon is showing me when I looked into just what the Gas Processor in conjuction with the electron extraction circuit was doing to the system as a whole.

==================================================

So my nozzle/nozzles and pump will need to be rated at about 2GPH or about 126ml/min as a good starting point.
I like the built in filter on these.
Outside mount nozzles DevilsOwn Injection

About Us

Secure Supplies Media Group is

an international collective of Hot Rodders photographers, writers & drivers with a shared passion for promoting the world's most exciting

Hydrogen car culture stories.

Team Secure

Editor in Chief: Daniel Donatelli 
Senior Editor: Simone White
Editor at Large: Johny Case
Commercial Director: Willem Coetzee
Community Manager: Ryan
Butters
Technical Editor: Jason Nash
Concept Artist:  Samuel Hill
Senior Contributors:  Jacky Bright
Contributors:  Sally Smith, Joanne Livey, Bruce Smith.

Contact Us

We're always very interested to hear your own stories as well as to receive your feedback.

Please New Members first but if you don't find what you are looking for then you are welcome to contact us via email, thank you.

Secure Supplies  Social

 Facebook- @SecureSupplies

 Twitter      - @SecureSupplies

 Instagram - SecureSupplies

 Pinterest   - Secure.Supplies

Event Partners

Untitled.png

Automotive Partners

logo.jpg

Back to Main Site 

www.securesupplyusa.com

Merchandise Partners

Manufacturing  Partners

Manufacturing.png

Secure Supplies Energy Power Gas Magazine ™

All Rights Reserved Worldwide. Copyright © 2012 Secure Supplies Limited Daniel Donatelli © 2009 

TRADEMARKS BELONG TO THEIR RESPECTIVE OWNERS. ALL RIGHTS RESERVED

 No duplication is permitted of this site graphically or
conceptually unless requested and approved in writing.

TERMS OF SERVICE // PRIVACY & COOKIE POLICY // LEGAL NOTICES // ADVERTISING OPPORTUNITIES

Work with us Employment