Distributor ( Laser Distributor) Stanley Meyer

NO your Not Dreaming Meyers Tech is Real Secure Supplies Present the Laser Distributor.

 

Stan and Stephen Meyers where applying technology ahead of their time. One system which is pretty much standard on all care now is electroni ignition. There are many designs but now many using led/laser tech inside cap. I have made this page to increase the uptake of knowledge to show infect it is easy to connect these items to ECU's infact mast cars have this and Electronic accelerators already. The advantage by learning this way is you can connect the dots and see it can also be piggy backed in a basic way to drive solenoid and HV sparking for several varition of h2 injectors or water spilter injectors. the cold be as secondary injectors staged injectors or primary hydrogen on demand systems. Go get em boys and girls.

 

Features

Ignition Models 

Opitcal Sensors for Extreme spark Stability 

Improves Engines life

Improved Engine Acceleration

Multi Spark operations

Up to 3 seperate sparks per compression stroke

Eash Spark can be individual timed

eliminated sporatic spark operations

Control Coil Saturation , or time coil is energized can be set tovalues  varying rmps.

Allowing coil to run cool at idel

And deliver high energy in the  higher rpm ranges.

Increased torque at low rmps

LED static timing indicator to allow easy install simpe and accurate

Sensor inputs allow for diferent advance curve and sensor states. 

Sensors can be anologue, contact or switch based 

Taco out put can be adjust to work on any engine

Record data of number of starts , and rmp ranges 

Has Saftey features to pre set and protect coil. 

 

Can control 2 diferent ingition advance curves idel for hydrogen tuning

 

Watch video bottom right for more

 

 

 

 

Stanley Meyer Distributer
Stanley Meyer Distributer

Stan had a card extension board that would plug into any card slot to allow the main card to be extended outside the box to tune any on board internal pots or adjustments.

 

Once the card was properly tuned and or adjusted the card was removed from the card extension and placed back into it's slot and the card extension was placed back into It's slot.

 

The card extension was designed for anyone of the cards to be removed and plugged into it and it still function outside the box.

 

We will not be using the card extension in our design. Nor will our boards plug into a back plate,

 

They will have plugs with extended wire in order to get the boards outside the box for adjustment.

About Us

Secure Supplies Media Group is

an international collective of Hot Rodders photographers, writers & drivers with a shared passion for promoting the world's most exciting

Hydrogen car culture stories.

Team Secure

Editor in Chief: Daniel Donatelli 
Senior Editor: Simone White
Editor at Large: Johny Case
Commercial Director: Willem Coetzee
Community Manager: Ryan
Butters
Technical Editor: Jason Nash
Concept Artist:  Samuel Hill
Senior Contributors:  Jacky Bright
Contributors:  Sally Smith, Joanne Livey, Bruce Smith.

Contact Us

We're always very interested to hear your own stories as well as to receive your feedback.

Please New Members first but if you don't find what you are looking for then you are welcome to contact us via email, thank you.

Secure Supplies  Social

 Facebook- @SecureSupplies

 Twitter      - @SecureSupplies

 Instagram - SecureSupplies

 Pinterest   - Secure.Supplies

Event Partners

Untitled.png

Automotive Partners

logo.jpg

Back to Main Site 

www.securesupplyusa.com

Merchandise Partners

Manufacturing  Partners

Manufacturing.png

Secure Supplies Energy Power Gas Magazine ™

All Rights Reserved Worldwide. Copyright © 2012 Secure Supplies Limited Daniel Donatelli © 2009 

TRADEMARKS BELONG TO THEIR RESPECTIVE OWNERS. ALL RIGHTS RESERVED

 No duplication is permitted of this site graphically or
conceptually unless requested and approved in writing.

TERMS OF SERVICE // PRIVACY & COOKIE POLICY // LEGAL NOTICES // ADVERTISING OPPORTUNITIES

Work with us Employment