Electrolyzer,Tall,Tube,Cell,Stanley,Meyer

 

 

Home Builder Replications

9 Cell       

 

The Critical InFo you Want 

 

  • Outer tubes 1 inch diameter, 

  • inner tubes 3/4 inch diameter

  • Thickness 1/16 inch 

  • 316 L Stainless Steel. or higher.

  • 16 to 18  inches long 418 mm to 458 mm

  • Gap 1mm to 2mm

  • 9 Tube sets ( 18 Tubes inner and outer)

  • Clear tube acrylic 600/610 mm Aprox or 24 inches

  • end caps

  • can 3d print end caps for spacing see thingiverse .com

  • allo lift base of tube from base of cell 2-3 inches

  • Diameter of  tube holder 155 mm

  • Inside diameter of tube 156mm  

  • Cell tube Outside diameeter 184 mm

  • tube Wall thickness 2.8 mm

  • can reson set end caps or mill from acrylic

  • Note make a acrylic flange don't tap into the cylinder not strong enough.

  • when bolt end caps. use this 3d end cap to get spacing right. can adjust in www.blender.com

 

http://www.thingiverse.com/thing:84135

 

Cell Capacitence 

Stanel Meyer Shows this formula in the Technical Brief 

The capacitance formula reads as follows C= 0.2249*e*Area (Square In. of the area of your cells)/D (Distance is your Gap between you cells)* Eo (The dielectric of Water which Stan says is 78.54 I think the little (e) stands for the lenght of the cell

Home Builder Replications

7 Cell

About Us

Secure Supplies Media Group is

an international collective of Hot Rodders photographers, writers & drivers with a shared passion for promoting the world's most exciting

Hydrogen car culture stories.

Team Secure

Editor in Chief: Daniel Donatelli 
Senior Editor: Simone White
Editor at Large: Johny Case
Commercial Director: Willem Coetzee
Community Manager: Ryan
Butters
Technical Editor: Jason Nash
Concept Artist:  Samuel Hill
Senior Contributors:  Jacky Bright
Contributors:  Sally Smith, Joanne Livey, Bruce Smith.

Contact Us

We're always very interested to hear your own stories as well as to receive your feedback.

Please New Members first but if you don't find what you are looking for then you are welcome to contact us via email, thank you.

Secure Supplies  Social

 Facebook- @SecureSupplies

 Twitter      - @SecureSupplies

 Instagram - SecureSupplies

 Pinterest   - Secure.Supplies

Event Partners

Untitled.png

Automotive Partners

logo.jpg

Back to Main Site 

www.securesupplyusa.com

Merchandise Partners

Manufacturing  Partners

Manufacturing.png

Secure Supplies Energy Power Gas Magazine ™

All Rights Reserved Worldwide. Copyright © 2012 Secure Supplies Limited Daniel Donatelli © 2009 

TRADEMARKS BELONG TO THEIR RESPECTIVE OWNERS. ALL RIGHTS RESERVED

 No duplication is permitted of this site graphically or
conceptually unless requested and approved in writing.

TERMS OF SERVICE // PRIVACY & COOKIE POLICY // LEGAL NOTICES // ADVERTISING OPPORTUNITIES

Work with us Employment