Stanley Meyer LAZER LED Driver Circuits

We Have Learnt that we need to have a Driver in the Picosecond or greater to have the best effect

We have a  electronic card and making  several boards of this caliber

The SST165 Card is being tested at this time

The SST165 can drive LEDs, provided that their Vf is 2.5V or less, during operation. 

 

If a higher voltage LED is required, the SSD200 may be another option, albeit for pulsing at higher currents

(say around 100mA to 4A range), with Vf up to 9V, under certain conditions.

The SST165-2 or SST165-9 (evaluation kit version of the SST165-2) can deliver current pulses that have a risetime in the hundreds of picoseconds (ps).  Given a suitable diode, operating in 'gain-switched' mode, a laser diode can develop optical pulse widths less than 100 picoseconds; smaller numbers is faster. 

 

The SST165-14 output current pulse risetime is intentionally slowed down, for applications not requiring the extremely fast switching speed. 

 

The issue is with circuit parasitics; faster pulses can excite ringing if there is excessive parasitic

inductance and capacitance in the drive path. 

 

Using a slower-switching laser drive pulse reduces the tendency to excite these parasitics for a given application.  Keep in mind the bond wires and chip die area both contribute to these parasitics,

along with lead-length and wiring.

The SST165 is intended to be driven from +5V,

 

so a DC-DC regulator would need to be supplied to operate from +12 to +24V DC. 

 

The D200 can operate with +12V, given adequate airflow. 

Powering a D200 from +12V will allow driving lasers or diodes with forward voltages up to 9 Volts.

Another thing to keep in mind is that the SST165 is not DC-coupled (it won't drive a laser or LED CW, or, continuously 'ON'),

and is  meant for duty cycles that are less than 40% for the SST165-12 or SST165-14. 

 

All versions of the SST165 have a 50mA average laser drive limit,

and up to 700mA peak current drive capability. 

 

The SSD200 is DC-coupled, and doesn't have an 'ON' time limit; it can drive loads continuously.

 
Best regards,
--
Daniel Donatelli

Secure Supplies

danieldonatelli1@gmail.com

whatsapp + 66 83 647 3443

Skype danieldonatelli@Hotmail.com

Email danieldonatelli1@gmail.com

About Us

Secure Supplies Media Group is

an international collective of Hot Rodders photographers, writers & drivers with a shared passion for promoting the world's most exciting

Hydrogen car culture stories.

Team Secure

Editor in Chief: Daniel Donatelli 
Senior Editor: Simone White
Editor at Large: Johny Case
Commercial Director: Willem Coetzee
Community Manager: Ryan
Butters
Technical Editor: Jason Nash
Concept Artist:  Samuel Hill
Senior Contributors:  Jacky Bright
Contributors:  Sally Smith, Joanne Livey, Bruce Smith.

Contact Us

We're always very interested to hear your own stories as well as to receive your feedback.

Please New Members first but if you don't find what you are looking for then you are welcome to contact us via email, thank you.

Secure Supplies  Social

 Facebook- @SecureSupplies

 Twitter      - @SecureSupplies

 Instagram - SecureSupplies

 Pinterest   - Secure.Supplies

Event Partners

Untitled.png

Automotive Partners

logo.jpg

Back to Main Site 

www.securesupplyusa.com

Merchandise Partners

Manufacturing  Partners

Manufacturing.png

Secure Supplies Energy Power Gas Magazine ™

All Rights Reserved Worldwide. Copyright © 2012 Secure Supplies Limited Daniel Donatelli © 2009 

TRADEMARKS BELONG TO THEIR RESPECTIVE OWNERS. ALL RIGHTS RESERVED

 No duplication is permitted of this site graphically or
conceptually unless requested and approved in writing.

TERMS OF SERVICE // PRIVACY & COOKIE POLICY // LEGAL NOTICES // ADVERTISING OPPORTUNITIES

Work with us Employment